II. Data Cabinets, Data Racks

1. Wall-Mounted Data Cabinets

Wall-Mounted Data Cabinet MNORS – this optical distribution cabinet is designed for the placement of 672 optical connectors, both indoors and outdoors. It provides easy access to cables and fibers, the cable inputs/outputs can be found on the top or the bottom.

Wall-Mounted Data Cabinet MNS – designed specifically for the indoor installation of a 19” technology on to a wall. Sliding supporting doors are used during the installation. It is equipped with a lockable door.

Wall-Mounted Data Cabinet MBS – these data cabinets allow technology to be installed vertically, which makes them ideal for limited spaces. Equipped with sliding bars for fastening 19” technology.

2. 19” Racks

19” Rack FDHM 19” 24U – designed to store passive technology into a 19” frame with capacity of 24U. A cable management for a uniform patch cord length of 4m is included. The rack can be used as a larger distribution point for all types of networks. Installation can be done on a prepared concrete base.

19” Rack rDSLAM 450M – it contains metallic elements and extra space for splitters field. The required outage during installation of the cabinet is about 8 hours.

19” Rack MSS – the design of the self-supporting assembled frame enables an easy assembly of the data cabinet at the point of installation. The unique construction also allows to reduce their weight substantially. Equipped with sliding supporting rails and removable side covers.

19” Rack SAP 3 – designed for the installation of active and passive 21” or 19” outdoor technology. The data-cabinet has a mounting air-conditioning unit attached on the door. It is equipped with non-removable rear and side covers. The base is solid with panels with bushings. Installation should be on a plastic base.

19” Rack SAP 4 1500/2000 – constructionwise, the cabinet is designed in order to allow establishing the inner environment equal to technological rooms inside the buildings. The cabinet is dismountable into smaller parts which can be placed on the roof with the use of a crane. There is a working space in the lower part of the cabinet for storing a set of accumulators.

III. Fiber Optic Cables

1. HE01, GE01, FR01, LR01

2. ZO82, ZO81, ZO80, ZO79

3. EM01, WM01, Z108, Z202

4. QM01, ZO24, TM01, ZO19

5. ZO21, AL00, Z238, Z006

6. Z339, ZOO8

IV. Fiber Optic Accessories

1. Optical Splitters

Cable Splitter – used to divide the optical fibers of one cable into six plastic ducs. The maximum capacity of a cable is 288 fibers.

PLC Splitter - splits one or two optical signals into multiple output ports. Low insertion loss, high precision and low polarization loss.

PLC Splitter (small format)

2. Fiber Optic Pigtails

Patchcords and Fiber Optic Pigtails

3. Microducts, Buffer Tubes

Micro Duct System – designed for modular construction of optical networks. An effective solution for urban areas, energy, industrial and commercial zones. The complete modular system consists of microcables and optical fiber bundles blown-in into protected microducts connected by passive components. The system can be placed both outdoors and indoors.

4. Optical Adapters

5. Fiber Optic Trays

Fiber Optic Tray KM 4 - designed for up to 24 fibers. It can be used separately mounted on an existing mandrel or in conjunction with the FibeRoadTM System. It is compatible with all types of fibers and is very intuitive to use. A full range of Splice Holders is available to ensure compatibility.

Fiber Optic Tray KM 5 - fibers are terminated with pigtails to 12× SC or 24× LC connector – with additional PLC Splitter capacity. It is compatible with all types of fibers and is very intuitive to use. It has the ability to change direction of the fiber storage.

Fiber Optic Tray KM 7 - designed to hold up to 16 optical fibers and connectors. The tray has a built-in holder for 4 splices and also allows for placing various types of Splice Holders.

Fiber Optic Tray KM 9 - designed for up to 12 fibers. It can be used separately mounted on an existing mandrel or in conjunction with the FibeRoadTM System. The tray includes an integrated Splice Holder for heat shrinkable and crimp protection.

6. Miscellaneous

A) Splice Holders and Heatshrinks

B) PG Grommets

C) Patchcord Grommets

D) Grommet for Undivided Cable

E) Express Port

F) Ranging Rings